A Brennan company - serving West Palm Beach, FL

Tamko Roofing Company Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Tamko Roofing Company in West Palm Beach: What to Know First

Independent Tamko roofing service in West Palm Beach runs $350 to $1,900 for most repairs, and full replacements typically land between $11,000 and $22,000 depending on roof size, tear-off work, and the Tamko product line you choose. Most repairs are completed same day or next morning; a full replacement usually takes two to four working days. The price you get is the price on paper before any work starts. That’s how we operate.

Call (728) 203-3066

This page is for West Palm Beach homeowners who have a Tamko roof and want straight answers on repairs, replacement, or inspection. If you’re seeing stains on the ceiling, granules in the gutter, or shingles lifting at the edges after a storm, call (728) 203-3066. We’ll tell you what we expect to find before we even get on the ladder.

How Tamko Products Fail – and How We Fix Them

Tamko builds a solid shingle, but every product line has its habits. We work on these roofs across West Palm Beach every month, and here’s what actually shows up.

  • Heritage Premium architectural shingles: nail-line seal failure. In West Palm Beach humidity, the asphalt strip that bonds the shingle layers together softens and re-seals repeatedly through our wet-dry cycles. On roofs installed with nails driven too high above the seal strip, that cycle eventually breaks the bond. You’ll see shingles sliding or flapping after storms. We re-seat and seal the loose rows, and we check nail placement on every replacement shingle we set.
  • 3-Tab conventional shingles: wind tab blow-off. These are the flat, single-layer Tamko shingles common on older West Palm Beach starter homes. When the adhesive strip fails from age, the tabs fold up and tear at the nail line. It looks bad, but the decking underneath is usually fine. We replace the torn tabs and reseal the surrounding courses. If the roof is past about 15 years, we’ll tell you straight that patchwork is buying time, not solving it.
  • MetalWorks stone-coated steel: flashing compromise at side walls and chimneys. The panels themselves hold up well, but the step flashing against vertical walls takes a beating in our afternoon downpours. The metal expands and contracts, the caulk bead cracks, and water tracks in behind the flashing. We strip the old flashing, inspect the wall sheathing, and install new flashing with a proper overlap and sealant rated for metal-to-stucco contact.
  • Decking rot under Tiburon and Heritage shingles near valleys. West Palm Beach gets roughly 62 inches of rain a year, and roof valleys carry all of it. When a valley’s underlayment or metal channel was installed incorrectly, decking rots from the underside and you won’t see it until shingles start to sag. We find this on repair calls at least twice a month. The fix is a full valley rebuild: remove shingles, cut out the bad sheathing, install fresh decking, new underlayment, new valley metal, then shingle over it. It’s a real repair, not a patch.
  • Fascia and drip edge failure on Tamko FlashRiser edges. Water running off the roof edge gets wicked back behind the drip edge if the overhang is too short or the drip edge wasn’t lapped correctly. That rots the fascia board and the rafter tails. We replace the rotted wood, set a proper drip edge with a minimum overhang, and make sure the first course of shingles extends past the edge by the right amount. Small correction, big difference.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Tamko Roofing Company Process

Every Tamko roof job at Brennan Roofing Co West Palm Beach follows the same sequence. No shortcuts, no surprises.

  1. 1
    The call. You call (728) 203-3066. A live person picks up. No voicemail queue. We ask what you’re seeing, take the address, and set a time for us to come out.
  2. 2
    The inspection. We walk the roof, check the attic if we can, and document what we find. We look at the shingle condition, the flashing, the ventilation, the decking signs. Photos go in the report we leave with you.
  3. 3
    The written price. Before any work starts, you get a line-item price on paper. That’s our rule. The price does not move at the door. It does not change after we open the wall. If we find something mid-repair, we stop, show you, and put the change in writing before we touch it.
  4. 4
    The parts decision. We’ll tell you whether OEM Tamko materials make sense or whether a quality aftermarket match gets the job done without breaking the warranty context. For active Tamko warranty work, we follow the manufacturer’s required materials. For out-of-warranty repairs, we’ll give you the cost difference and let you decide.
  5. 5
    The work. Uniformed, background-checked techs do the job. They cover the landscaping, protect the entry paths, and clean up as they go. If it’s a replacement, we tear off the old, inspect the decking, install the underlayment, and set the new Tamko product to manufacturer spec.
  6. 6
    The walkthrough and the paperwork. We walk the roof with you after the job, show you what was done, and hand you the written guarantee. The Done Right Promise covers the repair or installation for one full year, with a free return visit if anything fails.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Tamko Roofing Company Costs in West Palm Beach

West Palm Beach pricing for Tamko work depends on roof size, pitch, number of stories, and what we find under the shingles. Here are the ranges we’ve actually written on estimates across this market.

  • Single shingle repair (3-tab or architectural): $350 – $550
  • Small flashing repair (pipe boot, vent, drip edge section): $425 – $700
  • Valley rebuild with decking replacement: $1,100 – $2,400 depending on valley length and sheathing condition
  • Flat roof patch on Tamko modified bitumen or self-adhered membrane: $600 – $1,300
  • Full tear-off and replacement with Tamko 3-tab (smaller ranch, ~18 squares): $11,500 – $14,500
  • Full tear-off with Tamko Heritage Premium architectural (~25 – 30 squares): $16,000 – $22,000
  • Roof inspection (documented, with photos): $195 – $350, credited toward repair if you hire us

What moves the price: second-story work, steep pitches, rotten decking under the old roof, and how much flashing detail the roof has. You get the exact number in writing before work begins. Call (728) 203-3066 to schedule a free estimate.

Why West Palm Beach Homeowners Call Brennan Roofing Co West Palm Beach for Tamko Work

We don’t compete on being the cheapest roofing company in West Palm Beach. We compete on being the one that shows up, does the job right, and stands behind it in writing. The Garrison Standard is how we work: written price before any work starts, background-checked uniformed techs on every job, live person answering the phone around the clock, and the 365-Day Done Right Promise on every repair and installation. If it fails within a year, we come back and make it right at no charge. That’s in writing.

We also don’t treat Tamko as a religion. If your budget, your roof’s condition, or your long-term plans call for GAF, Owens Corning, or CertainTeed instead, we’ll tell you plainly. We install from all of those lines and more. The decision belongs to you. We just make sure you have real numbers before you make it.

Travis Oakley grew up in Los Angeles and learned the roofing trade at Los Angeles Trade-Technical College before spending the better part of three decades on real roofs in real weather. He and the crew have done Tamko work all over West Palm Beach, including jobs in the Northwood Hills neighborhood where older flat roofs and updated tile work keep you honest. A roof done right doesn’t ask for your attention until it’s time for a new one. That’s the benchmark.

FAQs

Need Roofing help in West Palm Beach? Licensed & insured · Written quotes before work starts response · free estimates
Call (728) 203-3066
Local Service Coverage

Request a Free Estimate in West Palm Beach

Tell us what you need - Brennan Roofing Co West Palm Beach responds fast. No obligation.

By submitting this form, you accept our Privacy Policy and agree that you may be contacted through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch